Clik here to view.
MUSIC BOX using PIC12F629 Microcontroller
This project is an extension of a number of musical projects (Happy Birthday and It’s a Small World) and puts 11 melodies into a single design. It’s called EVOLUTION. From the previous projects we...
View ArticleClik here to view.
SKY WRITER using PIC12F629 Microcontroller
We have seen many projects using a set of LEDs to produce words “in the air,” but none have the clever feature we have included. Most of the projects are “shaken in the air” and produce messages that...
View ArticleClik here to view.
SOLAR TRACKER-1 using PIC12F629 Microcontroller
This project will improve the output of your solar panel by about 40%. It uses a motor and gearbox from a 3.6v power screwdriver, however a number of different voltage motors can be used. The project...
View ArticleClik here to view.
Touch Switch using PIC12F629 Microcontroller
You can add this circuit to all sorts of projects that require on-off control. Our design allows up to 4 touch sensors using a PIC12F629. The output of each touch sensor is active LOW and this can be...
View ArticleClik here to view.
20 LED BADGE using PIC12F629 Microcontroller
This project drives a number of LEDs via a very clever circuit. There are 3 ways to dive a LED from an output of a micro. The simplest is called “dump.” This is where the LED is connected directly to...
View ArticleClik here to view.
Servo Motor Controller using PIC12F629
This project controls two servo motors – both clockwise and anticlockwise and has variable speed. You can use the Joy Stick to “pan and tilt” a remote camera or provide “left-right-up-down” action for...
View ArticleClik here to view.
Serial Controlled RGB LED PWM Driver PIC12F629 based PWM controller for RGB LEDs
Description If you want to build your own multiple RGB LED display that you can control from either a PC or a dedicated controller then this project will let you do just that. The project on this page...
View ArticleClik here to view.
Navigation Lights for Models for PIC12F629
Description This project was inspired from a post on the Picprojects forum where a member had adapted the RGB Moodlight project for use as a strobe and beacon for a model aircraft. I thought this would...
View ArticleWireless controlled lightdimmer using PIC12F629
The meaning from this design is to build it in -i.e. a shaded lamp- and to switch this lamp on and off the normal way, just like it was switched before the dimmer was build in, then you could by...
View ArticleRGB LED PWM Driver for High Power 350mA LEDs using PIC12F629
Description This project combines a PIC and three constant current ‘buck’ converters to produce an RGB LED controller that will operate with the the high power 350mA LEDs using PWM to control the LED...
View Article